DescriptionQuick Check™ System
Hunter's Quick Check™ inspection system performs a comprehensive vehicle inspection in under two minutes. By gathering valuable information about a vehicle's alignment, brake performance, battery health, diagnostic codes, and tire health, Quick Check allows shops to check every car, increasing revenue and improving customer retention. |
Technical SpecsSite Specifications
Power Requirements: 115/230v, 15 amp*, 50/60 Hz 1 phƗ
Air Supply: Req. (SI Units) 90-150 PSI (6.2-10.3 bar)
Min. Concrete Spec.: 3 in. (76 mm) thick, 3000 PSI (20,700kPA) rating
Grout Spec.: only required to keep sensors parallel to floor
Max. Longitudinal Slope: 1/4 in. per ft. (21 mm/m)
Max. Lateral Slope: 1/16 in. per ft. (5 mm/m)
Pedestal Location: 36-96 in. (914-2438 mm) from QT1
Product Specifications
Max. Wheel Weight: 3500 lb. (1588 kg) per wheel
Test Entry Speed: 2 to 8 mph (3-13 km/h)
Shipping Weight
Quick Check Cabinet: 290 lbs (132 kg)
Quick Check Drive Under Sensor: 316 lbs (143 kg)
Quick Tread: 530 lbs (241 kg) |
