Technical SpecsMax. vehicle gross weight: 20,000 lbs. (9,072 kg) per axle
Drive-on height: 24 in. (610 mm)
Runway width: 33 in. (838 mm)
Overall width: 106 in. (2,692 mm)
Distance between runways: 40 in. (1016 mm)
(Installed width can be varied)
Overall length: (Standard configuration) 403 in. (10,236 mm)
Length of modular runway section: 46 in. (1168 mm)
Approach ramp angle: 8˚
Power requirements: 220V, 1ph., 20A
PIT MOUNT
RKHD-P-24 : Pair of turnplate sections for 24-inch pit.
20-1780-2: Pair of modular runway sections for 24-inch pit. Adds 46 inches to wheelbase capability.
RKHD-P-30: Pair of turnplate sections for 30-inch pit.
20-1783-2: Pair of modular runway sections for 30-inch pit. Adds 46 inches to wheelbase capability.
20-1781-2: Pit adaptor secures runway to pit back wall.
Standard configuration with four runway sections and pop- up section raised.
*This wheelbase shows a common 52-inch tandem spacing. Other tandem spacing will result in different wheelbase measurements.
Jacks
133-77-2 HD AC rolling pit jack, 35,200-lb. capacity.
133-81-2 HD AC jack tray for 24-inch RKHD.
133-76-2 HD conventional jack tray for 24-inch RKHD.
When ordering jack guide rails, consult the 900D ordering guide to determine what should be ordered for your RKHD configuration.
Additional Options
20-2709-1 Two standard turnplates
20-2708-1 Two truck electronic turnplates
20-2710-1 Two audit turnplates; low friction / high durability
|
